80 Ton Hydraulic Punching Machine J23 Series

J23 80 ton mechanical electric punch product highlights

J23 series presses are general-purpose open-tilting power presses with simple structure, reliable performance, and convenient operation. J23 80 ton mechanical electric punch can use rigid turnkey clutch, easy to operate and maintain.We specialize in producing J23 80 ton mechanical electric punch, CNC bending machine, hydraulic shearing machine, V-grooving machine, laser cutting machine, etc. The products have been sold to Germany, the United Kingdom, the United States, Australia, Russia, Italy and other countries, and have been unanimously recognized by customers.

A punch is a punching press. Stamping production is mainly for plates. Through the die, blanking, punching, forming, deep drawing, trimming, fine blanking, shaping, riveting, and extrusion can be made, saving materials and energy compared with traditional mechanical processing. High efficiency, so its use is more and more extensive.

The different driving force is divided into the mechanical and hydraulic punch. Today, let's look at the structure and basic principle of China XIYUAN mechanical punch.

China 80 Ton Hydraulic Punching Machine J23 Series is also a mechanical punching machine. It uses the compressed air provided by the close air pump to enter the cylinder through the solenoid valve and drives the piston to the main shaft. The specified deformation is generated in the mold to achieve the purpose of processing. To facilitate the use of customers, the electrical control part is also added to the equipment, which greatly improves the efficiency of work.

Working principle of China XIYUAN mechanical punch

The products or parts produced by punching machines or hydraulic machine tools for mechanical punching machines are called stamping parts. Stamping power male molds, female molds, and raw materials for the products (usually metal sheets or wires) are built. The machine tool drives the male mold under the action of stamping power The process of cutting, punching, stretching, etc., of the raw materials between them by opening and closing the mildew and the master mold is the working principle of the stamping machine.

The design principle of the punch press is to convert the circular motion into a linear motion. The main motor outputs power to drive the flywheel, and the clutch forces the gear, crankshaft (or eccentric gear), connecting rod, etc., to operate to achieve the linear motion of the slider. The move from the motor to the connecting rod is circular.

The punch mechanism applies the crank-slider agent, mainly composed of a rotating pair, a connecting rod rotating pair, and a sliding pair. The vertical placement of the crank-slider mechanism can ensure the maximum speed when the stamping hammer reaches the lowest point.

Main features of China 80 Ton Hydraulic Punching Machine J23 Series

1. J23 series open eccentric press is a general-purpose press suitable for cold stamping processes such as forming, blanking, punching, and bending.
2. C-shaped frame casting body, maximum rigidity and minimum deflection, high precision of parts, and long tool life. The body can be tilted with high rigidity, small deformation, and compact structure. A thick plate and large columns give you the stable platform you need for demanding applications.
3. China XIYUAN is used as the manufacturer of the machine; the machine uses a rigid rotary bond and good support. The clutch provides continuous travel for mass production.
4. The crankshaft is made of special alloy steel with high machining accuracy and is installed in a bronze bushing for smooth operation, longer life, and higher precision.
5. Properly sized flywheel, made of high-quality cast iron, stores and releases enough energy for pressing operations and is properly balanced to ensure smooth operation.
6. The gears are steel castings or machined parts. The gear teeth are produced by a precision gear hobbing machine.
7. Two-hand buttons and a foot switch control the machine: anti-shackle, non-repetitive control, with ring protection device; in line with OSHA.
8. Protective fences and safety interlocks ensure safe operation. With a removable one-hand foot switch, it is easy to operate.

Principles of Mechanical Movement

1. During the movement process, the driving wheel (crank) drives the connecting rod, and the connecting rod goes to the stamping head to complete the stamping action.
2. Most the mechanical punches have a crankshaft structure, which is easy to manufacture, and can correctly determine the position of the lower end of the stroke and the movement curve of the slider. It is mainly suitable for punching, bending, stretching, and other processing.
3. China XIYUAN as a mechanical manufacturer, a mechanical punch is generally composed of an upper die, an upper die holder, a lower die holder, the inclination of the cutting edge, the opposite side pressure block, the guide plate, the guide post, and other parts; the main motor drives the flywheel, clutch, gears, crankshafts, connecting rods and other components run, allowing the slider to move in a straight line.
4. The motor drives the pinion, and the pinion and the large gear are coaxial to achieve deceleration and increase torque;
5. Two working keys are in the big gear, usually blocked by age. After stepping on the manipulator, the big gear drives the active keys to realize the clutch and outputs the power to the crankshaft, which causes the slider, and the gravitational acceleration stroke;
6. Under the action of the pressure force, the male mold and the female mold are driven to open and close, and the raw materials between them are cut, punched, stretched, etc., and the stamping is completed.

J23 80 ton mechanical electric punchProduct details

J23 series is the most widely used press at present. The J23 80 ton mechanical electric punch is characterized by a left and right open body, which can be tilted within a certain range, which is convenient for stamping finished products or scraps to slide off the die. The table is opened in three opposite directions, and the mold is installed. , Unloading is more convenient. Strong versatility, reducing maintenance costs. It can be widely used in stamping, blanking, bending, forming, shallow stretching and other processes.

Main features of J23 80 ton mechanical electric punch

• The casting body is adopted, and the working table is open in three directions, making it easier to load and unload the mold and operate. High rigidity, small deflection, precise parts and long tool life.
•  J23 80 ton mechanical electric punch adopts rigid rotary key clutch, simple structure, convenient operation and maintenance, and stable work.
•  The slider is equipped with a collapsed overload protection device, which is sensitive and reliable, and protects the safety of machine tool parts and molds.
• Using ball bearings, low noise and high wear resistance.
• Suitable for flywheels, made of high quality cast iron, J23 80 ton mechanical electric punch stores and releases enough energy for punching operations, and is properly balanced to ensure smooth operation.
•  The J23 80 ton mechanical electric punch crankshaft adopts special alloy steel with high machining precision. It is mounted in a bronze bushing for stable operation, longer life and higher accuracy.
•  Eliminate the gap between the slider and the connecting rod, J23 80 ton mechanical electric punch reduces the impact and wear of the parts.
• J23 80 ton mechanical electric punch has high precision, high efficiency, simple and convenient operation, good performance, excellent price and first-class service.

China XIYUAN has a physical factory, which produces and sells itself. Customers are welcome to visit the factory. Excellent raw material selection. The strict production process controls product quality, and our factory has various product specifications, which can be customized according to your requirements. Pre-sale consultation, in-sale follow-up, and after-sale return visit is a manufacturer factory with assured quality and considerate after-sale.

FAQ

1. Are you J23 80 ton mechanical electric punch manufacturer or trading company?

We are J23 80 ton mechanical electric punch manufacturer.

2. I don't know how to operate the J23 80 ton mechanical electric punch?

We can send our J23 80 ton mechanical electric punch engineers to your country, you can also send your engineers to our factory to learn to operate J23 80 ton mechanical electric punch. In addition, detailed installation and operating instructions are included, which is very simple .We provide phone and email support 24 hours a day.

3. What is the quality of J23 80 ton mechanical electric punch?

Hydraulic company is a mature brand in China, through our 12 years of technical research, our design including structure and details are greatly improved in safety and precision, which can match all CE standards or stricter standards. Our J23 80 ton mechanical electric punch is distributed in about 50 countries around the world with sheet metal industry and where our machines are located, with a good reputation and end-user satisfaction.

4. What are your payment terms for J23 80 ton mechanical electric punch?

We support T/T, L/C, D/P, D/A, Western Union, etc. TT, 30% prepaid, 70% paid before shipment.