CNC Hydraulic Press Brake Sheet Bending Machine With S630 WE67K Series

Introduction to the working method of hydraulic bending machine

The WE67K CNC hydraulic press brake machine with S630 controller features an automatic CNC system, a high-quality servo-driven back gauge system that increases the speed of the machine’s operation, and a 3D graphic control unit for simulating bending sequences and collision points.

•  Set the pressure holding time, unloading time, horizontal baffle advance and retreat distance, and adjust the horizontal baffle position of the CNC plate bending machine.
•  Set the number of steps for the CNC Hydraulic Press Brake Sheet Bending Machine With S630 WE67K Series, as well as the blocking position and number of bending sheets for each step.
•  Select the continuous operation gear; the lower press bending mechanism is not on the upper stroke switch position, first automatically return to the stroke switch position; step on the foot slowly, and the lower pressure Hydraulic bending machine automatically lowers the pressure; when the stroke switch is touched, the horizontal baffle mechanism retracts to set the distance, and the pressure is automatically maintained; the CNC plate bending machine pressure preservation time to automatically discharge pressure, unloading time The lower pressure Hydraulic bending machine consists of automatic return travel, while the horizontal baffle mechanism automatically moves forward and sets the distance; when it hits the stroke switch, one bending auction ends, and the next bending is carried out.
• The current step bending number is completed, the stroke switch is hit, and the horizontal gear position is automatically adjusted. The CNC Hydraulic Press Brake Sheet Bending Machine With S630 WE67K Series enters the next step of bending action.
• All steps are completed, hit the stroke switch, and the continuous bending action of the Hydraulic bending machine ends.

WE67K CNC Hydraulic press brake sheet bending machine with S630 controller Product Advantages

• All the performance of an advanced CNC in an economical and user-friendly controller.
•  The most powerful of its kind. 10 inch touch screen,WE67K CNC Hydraulic press brake sheet bending machine with S630 controller with powerful graphics.
• Offers a combination of performance, cost-effectiveness, and ease-of-use
•  Great value! Best value for money WE67K CNC Hydraulic press brake sheet bending machine with S630 controller on the market.
•  User-friendly CNC control unit and software
•  Large light openings allow optimal use of the entire length of the machine
•  Designed and manufactured to help you achieve low-cost manufacturing
• Easy-to-use advanced graphics programming and sophisticated algorithms to get the most out of your machine.
• Directly manage any type of servo valve,WE67K CNC Hydraulic press brake sheet bending machine with S630 controllerwithout external amplifier.
•  Up to four axes can be managed in any combination, including electric press brakes and tandem.

Delem DA66T CNC System

• 2D graphic touch screen programming mode.
•  3D visualization in simulation and production.
•  17″ high resolution color TFT.
• Windows application compatible.
•  Delem Modusys compatibility. (module extensibility and adaptability)
•  USB, peripheral interface.
•  Open system architecture.
• User specific application support in controller multitasking environment.
•  Sensor bend correction interface.

Standard Equipment

• Integral welded steel frame with strong flexural resistance and high tensile strength, WE67K CNC Hydraulic Press Brake Sheet Bending Machine With S630 Controller adopts ST44 A1 material.
• 6 axes (Y1, Y2, X, R, Z1, Z2)
• Throat is 410mm deep.
• Back gauge system, X, R, Z1, Z2 axes are driven by AC servo, color graphics.
• HOERBIGER servo hydraulic system.
•  CNC electric anti-biasing system.
•  Hardened and ground standard section top and 4V die bottom tools (835mm section).
•  Easy clamping upper and lower tool clamping system.
•  Ergonomic user-friendly hanging control panel.
• Backlight safety guards (category 4)
• Front cover with safety switch.
• The synchronization of the Y1+Y2 axes is provided by a linear encoder with a tolerance of 0.01 mm.
• The pedals comply with CE regulations.
• Sliding front support arm with T-slot and mm/inch scale.
• Standard Graphics Controller Optional: DelemDA66T 3D Color Graphics Touch Screen Controller, Cybelec Mod Eva 12 S
• CE compliant electrical panel with cooling system.

How to turn off the Hydraulic bending machine

• Close the machine to the middle of the lower dead point, that is, move the slider to the center of the lower dead point, turn off the main motor, set the operation switch to “0”, and the main switch to “0”.
• Close the bending machine with two pieces of wood of the same height; that is, place the two pieces of wood on the workbench, and adjust the operation mode selection button to “2”. Wait until the CNC Hydraulic Press Brake Sheet Bending Machine With S630 WE67K Series is closed, manually pull down the slider until you can reach the wood block. Then set the operation mode selection button to “0”, and finally, the main switch to “0”.
• Use the emergency stop button.When using the emergency stop button, all shafts and pumps stop, but the control system is not turned off. Please restart the machine: first release the emergency stop button, and then press the green key to run the machine. No need to reset the upper and lower mold parameters.

Solutions for large bending angle errors

• Check whether the compensation deflection of the hydraulic bending machine compensation cylinder is large and cannot completely restore the zero position.
• Check whether the CNC Hydraulic Press Brake Sheet Bending Machine With S630 WE67K Series quick clip oblique is loose.
• Check whether there is any change in the dead point of the hydraulic bending machine under each bending.
• Check whether the installation of the hydraulic bending machine bow trigger is standardized and whether the screw hole is dead.
• Changes in the hydraulic bending machine plate itself (thickness, material, stress).
• Is the grating ruler loose in the CNC bending machine.
• The positioning accuracy of the CNC bending machine is not accurate: whether the zero offset value of the proportional valve is appropriate, and the positioning cannot reach the lower dead point so that it cannot return.