Hydraulic CNC Press Brake Machine

Successful, modern sheet metal production is unthinkable without high-performance software. The hydraulic CNC press brake machine features an efficient control algorithm with control precision that reduces the time required for setup and ensures consistently high quality production.

Product Description

Brand: Anhui Xiyuan Machine       Origin: China
Shipping time: 30 days       Availability: 30 set/month

The operation method of hydraulic numerical control bending machine


  • First, the china hydraulic CNC press brake machine turns on the power, turns on the switch on the control panel, and starts the oil pump.
  • When adjusting the stroke, you must pay attention to changing the stroke of the hydraulic CNC press brake machine when using it, and be sure to test it before bending. There must be a gap in the thickness of the plate when the upper die descends to the bottom. Otherwise, it will cause damage to the molding machine. The adjustment of the stroke is also electric and quick.
  • When selecting a bending slot, you should generally choose a notch with a width of 8 times the thickness of the plate. If you bend a 4mm sheet, you need to select a gap of about 32.
  • The rear gear adjustment generally has quick electric adjustment and manual fine-tuning, and the method is the same as the shearing machine.
  • Step on the footswitch to start bending. The hydraulic CNC press brake machine mold is different from the plate shearing machine. It can be released at any time; stop when you remove the foot and continue to go down when you step on it.


Hydraulic CNC Press Brake Machine noun definition


  • L-axis positioning: The distance from the center of the mold to the center of the mold after positioning when bending. That is the bend size.
  • D axis depth:The greater the distance between the upper and lower dies during bending (excluding the thickness of the workpiece), the greater the angle generated by the workpiece during bending.
  • D axis slow speed:hydraulic CNC press brake machine speed is “0” to “9”, respectively. The smaller the value, the faster it is.
  • Rear pull distance: To prevent the workpiece from colliding with the rear positioning top block. When the table rises to the position where the workpiece begins to bend, the rear positioning block retracts
  • Quantitative distance. The distance determines the safe space required to prevent collisions between the workpiece and the rear positioning block.
  • Number of repetitions:Set the number of repeated bends of the china hydraulic CNC press brake machine, which can be repeated up to 99 times. “0” means no repetition, only one angle.
  • Step distance: In the same “setting project,” the space to move forward in the back position each time a bend is repeated. If the value is “0”, no movement will be made.


Check the tutorial


  • Strictly abide by the safety operation rules of xi yuan machine tools, and wear labor protection equipment according to regulations.
  • Before starting, carefully check whether the hydraulic CNC press brake machine motor, switch, line, and grounding are regular and firm, and check that each control part and button of the equipment stay in the correct position.
  • Check the cohesion and robustness of the upper and lower dies; check whether each positioning device meets the requirements to be processed.
  • Run the Return to Origin program when the upper skateboard and each positioning axis are not in the original state.
  • After the equipment starts, it runs in the air for 1-2 minutes, and the skateboard moves 2-3 times at full stroke. If you find that the hydraulic CNC press brake machine has abnormal sounds or malfunctions, you should stop immediately to troubleshoot and work after everything is normal.
  • The operation should be conducted by one person so that the china hydraulic CNC press brake machine operator cooperates closely with the feeding and pressing personnel to ensure that the cooperators send bending signals in a safe position.
  • The plate must be compacted when bending to prevent the china hydraulic CNC press brake machine from warping and injuring people.

Hydraulic CNC Press Brake Machine Features


  • Less Waste, Less Maintenance.
  • High Performances.
  • Same Job, 50% Less Energy.
  • <High Dynamic Y-axis Control.
  • <Over 30% higher productivity.


hydraulic press brake machine 3


Standard Equipment


  • CNC DELEM DA66T with 2D color graphics.
  • Hydraulic® BGA-4 for X=600mm X, R, Z1, Z2-Axis.
  • Hydraulic® Hybrid Servo ECO Function.
  • Tool kit: 4 V die (V=16-22-35-50) series of 835mm punches.
  • Hydraulic Pro CNC wave crowning system.
  • GIVI optical scales.
  • Lazersafe Systems LZS-2 Block Laser.
  • Hoerbiger (HAWEI) hydraulic system.
  • High efficiency motor – class IE3.
  • DELEM® Profile T2D Offline Software.
  • Electrical cabinet with Schneider, Siemens components.


CNC Control System


  • Over 35 Years Of Experience In Top Level Controls.
  • Successfully controlling precision & productivity, modern sheet metal production is inconceivable without high performance software. Highly effective control algorithms optimize the machine cycle, reduce the time required for set-up and ensures consistently high quality.
  • Hydraulic is one of the world’s leading manufacturers in the field of steel metal working machinery for our Laser Cutting Systems & Press brakes.


DELEM CNC Control System


  • DELEM DA66T Touch 2D Graphical Control.
  • 17″ high resolution colour TFT.
  • 2D graphical touch screen programming mode.
  • 3D visualisation in simulation and production.
  • Full Windows application suite.
  • Delem Modusys compatibility (module scalability and adaptivity).
  • USB, peripheral interfacing.
  • Profile-T2D offline software.
  • Sensor bending & correction interface.


hydraulic press brake machine 2

Hydraulic BGA-4 BackGauge with Rear thin Supports


  • Press Brake 4-Axis CNC BackGauge With X, R, Z1, Z2-Axis.
  • Ball screws and linear guide on X, R-axis.
  • Precision belts and YYC rack on axes Z1‐Z2.
  • Fingers with double stop and micrometric adjustment.
  • Mechanical accuracy ± 0.03 mm.
  • Axes Z1‐Z2 speed 1000 mm/s.
  • Axis X speed 500 mm/s.
  • SPA Thin supports system in the fingers.
  • Load capacity – 30 kg per support.


Safety Arrangement


  • Lazer Safe – Performance Without Compromise.
  • The LZS Series and IRIS Series Safety laser protection provide superior optical protection while maintaining the highest level of productivity and performance for CNC press brake.


Optical Safety System – Advanced


  • Hydraulic® CNC press brake use OEM EMBEDDED LAZERSAFE offers a highly effective solution for both operator safety and machine productivity. Designed for use with Lazer Safe’s PCSS A Service, the Lazersafe is category 4 compliant and meets the world’s most demanding international safety standards(CE Certified Category 4 Safety Controller with integrated).




  • Lazersafe-PCSS A0 LZS-XL.
  • Lazersafe-PCSS IRIS.
  • Hydraulic PPO® Family CNC Crowning:
    The Hydraulic Pro® Adaptive CNC Crowning system enables theuser to offset deformations of the beam while bending. thus, the angle iskeeping constant along the entire plate length.

hydraulic press brake machine 1

Advantage Of 2Hydraulic CNC Press Brake Machine


  • Easy reversibility of tools because of symmetrical adaption.
  • Hand crank with digital readout or CNC electric drive connected direct to the machine.
  • Hardened to 28–32 HRC which makes it substantially tougher than the competition.
  • Micro crowning every 200mm.
  • T & Y adjustable 0–0.76mm (0–0.030″).
  • High dynamic for a higher productivity of the machine.
  • Compliance with EU Directives.
  • Lower energy for a green Machine.
  • Lowered sound pressure level at 50 dB.
  • The servo-motor, with closed loop speed control.
  • Energy efficiency of up to 35 % compared to conventional systems.
  • Operating cost is min due to low energy consumption. thus, it gives advantages to the user with high efficiency & low operation cost.
  • Safe and fast tool change.
  • Can be used without modifying Europe type punches.
  • Front clamp – vertical tool change.
  • Rear clamp – horizontal tool change.
  • Hybrid Servo ECO Function.
  • Hydraulic New Hybrid Servo ECO Function.
  • Hydraulic® promotes a friendly environmental policy, and as such all our equipment features the Hybrid ECO Function. Our hybrid servo-drive positioning system provides accuracy at any position.


Manual Upper Tool Clamping


Hydraulic CNC press brake use all Raw material is provided by qualified suppliers and chemical composition corresponds to international standards. Therefore, raw material yield and tensile strength are guaranteed.are standardized with a 8.4 x 3.5 mm safety groove, which keeps the tool from falling out.


Bending Offline Software


Indispensable Tool To Increase Profitability.DELEM DA-Offline software maximises machine efficiency and production output of press brakes. The Profile-T3D software facilitates offline programming and simulation the bending process.


Profile T3D Offline Programming


The Bending offline software is an indispensable tool to increase the profitability of any CNC press brake machine. The offline software Profile T3D enables in a quick, easy and efficient way, importing and unfolding 3D files, finding automatically solutions for tooling and bend sequences and simulating dynamically in 3D for checking collisions.


Industry 4.0 With IOT Productivity Monitor™
Thanks to the advanced Hydraulic® CNC and interconn


Company Profile

 Maanshan Xiyuan Machinery Technology Co., Ltd. is located in Maanshan City, Anhui Province. We specialize in R&D, production and sales of metalworking machine tools, including bending, cutting, shearing, grooving and punching. We look forward to cooperating with end users and distributors with our good quality, service and price. Our brand is named Xiyuan, we also welcome OEM, ODM orders. Let us be your business support and you will have no problems with machine delivery operation and installation. We guarantee full assistance and guidance.

milling cutters g4d4896a8d 640

FAQ about the company

Ma’anshan Xiyuan Machinery Technology Co., Ltd is a machine tool manufacturing, bending mold, and mechanical cutting production as one of the production bases.
The company is located in the southeast gateway of Anhui Province, next to Nanjing Lukou Airport, in the developed Yangtze River Delta area, with well-developed transportation and fast transportation.

We have standard product for shearing machine/punching machine/Press brake/laser cutting machine , we will reply you quickly with the quotation for such kind of product. We also focus on the customized and both developed product,  the quotation will be sent after mutual discussion for detailed requirement.

You can get in touch with us through the form on the page or contact information (tel:+ 86 18298207106 mail:[email protected]). We will respond to your questions as soon as we see your message.

When you need to modify your order, please communicate with our sales staff to confirm your latest needs and draw up a new contract based on your needs. We will produce products according to your needs.

When you need to modify your order, please communicate with our sales staff to confirm your latest needs and draw up a new contract based on your needs. We will produce products according to your needs.

The company is located in the southeast gateway of Anhui Province, close to Nanjing Lukou Airport, and is located in the developed Yangtze River Delta region, with well-developed and fast traffic. Due to the particularity of the product, we generally choose to ship by sea. If you have special needs, you can communicate with us.

Before delivery, we will send you the pictures and videos for you to check the machine quality.And also you can arrange for quality checking by yourself or by your contacts in China.

request a quote