160 Ton/3200mm Hydraulic Press Brake Machine With DA-53T WE67K Series

The WE67K series CNC bending machine is redesigned according to the user’s preference to improve the production efficiency, keep the cost at a minimum level, with high bending precision and low maintenance cost.Hydraulic Press Brake Machine With DA-53T adopts hydraulic convex automatic compensation system to solve the influence of the deformation of the slider during bending on the workpiece quality.

Product Description

Brand: Anhui Xiyuan Machine       Origin: China
Shipping time: 30 days       Availability: 30 set/month

Brief introduction

160 Ton/3200mm Hydraulic Press Brake Machine With DA-53T WE67K Series is a special machine tool for bending plates. Electro-hydraulic servo CNC equipment xiyuan machine hydraulic products are widely used. In these hydraulic control systems, proportional control technology is mostly used. The machine tool has a flexible CNC system dedicated to bending machines, which can be used as a highly automated operation to achieve high-precision bending plates. Using electro-hydraulic servo CNC equipment, high production efficiency and high-quality parts can be obtained when processing complex shaped plates, and high economic benefits can be obtained.

 

Electro-hydraulic servo CNC equipment controls the stroke of the rear gear and slider of the bending machine. Users can enter the part they want to bend, and then enter the bending angle for each step. Just drop the program out when you use it. The Hydraulic Press Brake Machine With DA-53T will adjust the distance and bending angle of the rear gear according to the input steps.

 

 Advantages of the Hydraulic Press Brake Machine With DA-53T

  • Hydraulic Press Brake Machine With DA-53T adopts hydraulic convex automatic compensation system to solve the influence of the deformation of the slider during bending on the workpiece quality. The compensation amount is automatically adjusted by the CNC system, which is convenient and accurate.
  • The full-function rear gear mechanism is adopted, and multiple rear gear shafts can be selected to be controlled. A functional part in the rear gear. Imported original parts, such as guide rails, screws, bearings, etc., are used to ensure the accuracy of the rear gear material.
  • The fuselage adopts an integral welded structure, which is convenient for transportation and processing, and can ensure the overall accuracy of the machine tool.
  • Important parts such as the fuselage and slider are analyzed using analysis software to ensure the reliability of the Hydraulic Press Brake Machine With DA-53T.
  • The hydraulic system adopts an integrated control system, which reduces pipeline installation, improves the working stability of the machine tool, and has a beautiful and simple appearance.

 

Hydraulic system fault diagnosis

 

  • After analyzing the principle of the hydraulic system of the bending machine, it is found that the hydraulic system pipeline, oil pump, control valve, and hydraulic cylinder of the Hydraulic Press Brake Machine With DA-53T may all have faults.
  • The diagnostic method of hydraulic transmission is to determine the cause of the fault through the inspection of the hydraulic system pipeline, and the replacement and adjustment of the oil pump, control valve and cylinder.
  • This diagnostic method has a lot of work and a long cycle.
  • This test method can diagnose faults conveniently and quickly, and greatly improve the working efficiency of the Hydraulic Press Brake Machine With DA-53T.

 

Basic contents of diagnosis

  • Hydraulic pump test, used to judge the failure condition of hydraulic pump and relief valve.
  • Control valve test, used to judge the fault condition of the hydraulic valve.
  • The hydraulic cylinder test is used to judge the failure condition of the hydraulic cylinder.

WE67K 160 Tom 3200mm Hydraulic Press Brake Machine With DA-53T Features

 

  • “Hotkey” touch navigation.
  • 10.1″ High Resolution Color TFT Up to 4 Axes (Y1, Y2+2aux.axes) Convexity Control.
  • Tool/Material/Product Library.
  • Servo and inverter control, advanced Y-axis control algorithms for closed-loop and open-loop valves.
  • USB memory stick interface.
  • Profile-53TL Offline Software.
  • The welding structure of the whole machine has high rigidity; the machine is designed with ANSYS software, which ensures the reliability and precision of the CNC bending machine.
  • The WE67K series CNC bending machine is redesigned according to the user’s preference to improve the production efficiency, keep the cost at a minimum level, with high bending precision and low maintenance cost.
  • High quality and repeatable bending accuracy are obtained by adopting synchronized cylinders and proportional valves from the world-renowned brand Rexroth-Germany.
  • Multi-axis CNC backgauge can process workpieces of different shapes well.
  • Higher free fall speed, higher bending speed and higher return speed than ordinary press brakes.
  • Enter the sheet metal material information, sheet size and punch size to calculate the bending angle and back gauge position.
  • The crowning system can automatically cooperate with the CNC controller for higher bending accuracy and linearity. Hydraulic crowning and electric crowning systems are optional.

we67k 160 tom 3200mm hydraulic press brake machine 3

 

Due to our open space design, the press brakes made by Hydraulic can easily accommodate parts with deep bends that require long tools. Our machines generally have deeper throats, more daylight space and longer stroke lengths than any manufacturer on the market.
We also installed RAM guides on the outside of the frame to maximize the distance between the side frames, allowing our brakes to accommodate deep section flanges.

 

we67k 160 tom 3200mm hydraulic press brake machine 5

 

The correct backgauge for an application can have a significant positive impact on the volume and accuracy of the produced part. The more complex the part, generally the more axles you should have on the backgauge. The volume of the part also needs to be considered. A smart, experienced WE67K 160 Tom 3200mm Hydraulic Press Brake Machine With DA-53T operator can bend, form and produce some very complex parts without even needing a single-axis backgauge. However, the more time it takes to form the correct part, the more it costs you to have a part. So the best case scenario is for an experienced WE67K 160 Tom 3200mm Hydraulic Press Brake Machine With DA-53T operator to improve their skills with the right back gauge system. But in today’s market, experienced smart press brake operators are increasingly difficult to find. Therefore, the correct application of the backgauge will help to be a good WE67K 160 Tom 3200mm Hydraulic Press Brake Machine With DA-53T operator, reducing the cost per part. The less experience the operator has, the more axes you should have. Additionally, experienced operators know the benefits of correct backgauge for the application. Hydraulic is here to consult with you on your application requirements.

 

we67k 160 tom 3200mm hydraulic press brake machine 4

FAQ

 

1.Are you WE67K 160 tom 3200mm hydraulic press brake machine with DA-53T controller manufacturer or trading company?

We are WE67K 160 tom 3200mm hydraulic press brake machine with DA-53T controller manufacturer.

 

2.What shall we do if don’t know how to operate your WE67K 160 tom 3200mm hydraulic press brake machine with DA-53T controller?

We can dispatch our WE67K 160 tom 3200mm hydraulic press brake machine with DA-53T controller engineers to your country and you can also send your engineers to our factory for learning operation. Besides, there are detailed installation and operating instructions attached, it is very simple. We have telephone and email support at 24 hours per day.

3.How about your WE67K 160 tom 3200mm hydraulic press brake machine with DA-53T controller machine quality?

Hydraulic company is a mature brand in CHINA,through our 12 years research in technology,our design including structure and detailed security and precision has enhanced greatly,and can match all the CE standard or more strict standard.Our WE67K 160 tom 3200mm hydraulic press brake machine with DA-53T controller machines distribute worldwide to about 50 countries where there are metal plate industry And where there are our machines,there are good reputation and terminal user satisfaction.

 

4.What are your WE67K 100 Ton 3200 Mm CNC Press Brake Machine With DA-52S payment terms?

We support T/T, L/C, D/P, D/A, Western Union and so on. TT, 30% in advance, 70% balance before the shipment.

Company Profile

 Maanshan Xiyuan Machinery Technology Co., Ltd. is located in Maanshan City, Anhui Province. We specialize in R&D, production and sales of metalworking machine tools, including bending, cutting, shearing, grooving and punching. We look forward to cooperating with end users and distributors with our good quality, service and price. Our brand is named Xiyuan, we also welcome OEM, ODM orders. Let us be your business support and you will have no problems with machine delivery operation and installation. We guarantee full assistance and guidance.

milling cutters g4d4896a8d 640

FAQ about the company

Ma’anshan Xiyuan Machinery Technology Co., Ltd is a machine tool manufacturing, bending mold, and mechanical cutting production as one of the production bases.
The company is located in the southeast gateway of Anhui Province, next to Nanjing Lukou Airport, in the developed Yangtze River Delta area, with well-developed transportation and fast transportation.

We have standard product for shearing machine/punching machine/Press brake/laser cutting machine , we will reply you quickly with the quotation for such kind of product. We also focus on the customized and both developed product,  the quotation will be sent after mutual discussion for detailed requirement.

You can get in touch with us through the form on the page or contact information (tel:+ 86 18298207106 mail:[email protected]). We will respond to your questions as soon as we see your message.

When you need to modify your order, please communicate with our sales staff to confirm your latest needs and draw up a new contract based on your needs. We will produce products according to your needs.

When you need to modify your order, please communicate with our sales staff to confirm your latest needs and draw up a new contract based on your needs. We will produce products according to your needs.

The company is located in the southeast gateway of Anhui Province, close to Nanjing Lukou Airport, and is located in the developed Yangtze River Delta region, with well-developed and fast traffic. Due to the particularity of the product, we generally choose to ship by sea. If you have special needs, you can communicate with us.

Before delivery, we will send you the pictures and videos for you to check the machine quality.And also you can arrange for quality checking by yourself or by your contacts in China.

request a quote