English 
Arabic 
Spanish 
Russian 
Chinese 
The combined punching and shearing machine is widely used in the modern manufacturing industry, and its application covers metallurgical, electric power, communication, military, and other fields. This punching and shearing machine is different from ordinary shears and has various functions such as metal cutting, die-cutting, bending, etc. However, in the process of use, if the operation of the equipment is not well understood and the equipment cannot be maintained in time, the service life of the punching and shearing machine will be significantly reduced. Below, China Hydraulic swing beam shear suppliers will take you to see how to extend the service life of the punching and shearing machine from both the aspects of use and maintenance.
Precautions for the use of the Combined Shearing and Shearing Machine
1.Strictly follow the instructions for use
When purchasing a Combined Shearing and Shearing Machine, the manufacturer will be equipped with a special instruction manual, which will explain the operation method of the hedge shear and the precautions for its use in detail. Operators should check the instructions before using the punching and shearing machine. Understand the corresponding operation methods and precautions to avoid damage to the punching and shearing machine caused by operation errors. If there is an abnormality during operation, you should immediately turn off the power and stop using it. You can continue to use it until the exception is eliminated.
2.Perform necessary checks on the hedge shear before use
After a prolonged use time, there will inevitably be some minor problems, such as loose screws. Therefore, before each use of the punching and shearing machine, the operator should conduct a comprehensive inspection of the punching and shearing machine, focusing on whether the parts of the punching and shearing machine are loose or missing, checking whether the wiring connection is standard if abnormalities or other problems are found, the problem must be solved before regular use, so that not only can The combined lifting and shearing machine plays a protective role and can also guarantee the safety of the operator to a certain extent.
3.If there is a problem during operation, cut off the power immediately
During the operation of the operator, if there is a problem, the operator should cut off the power of the Combined pulling and shearing machine the first time to ensure that after the punching and shearing machine is out of control, a comprehensive inspection of the punching shearing machine is carried out to troubleshoot the fault of the punching and shearing machine. Confirm that the punching and shearing machine has been resolved before the punching and shearing device can be used again.
4.Turn off the power in time after work is over
After using the punching and shearing machine, the operator must turn off the power in time and avoid the situation where t power is not turned off at the end of work. If the power is not turned off, it is easy to cause danger by accidentally opening the punching and shearing machine, and on the other hand, it is not very good for the maintenance of the punching and shearing machine. Therefore, after finishing work, the operator must check whether the power is cut off and confirm that the power is cut off before leaving.
Precautions for the maintenance of the combined pulley and shearing machine
1.Conduct regular inspections and repairs
For the maintenance of the Combined Pulling and Shearing Machine, in addition to conducting a comprehensive inspection before each use, the relevant staff also needs to carry out a series of examinations and repairs on the hedge shear regularly. Regular review is to find problems and solve problems promptly, and on the other hand, to avoid abnormalities in the use of the punching and shearing machine for a long time. Maintenance personnel from China Hydraulic swing beam shear suppliers need to be repaired if issues are found during a regular inspection. On the one hand, to ensure the regular operation of the punching and shearing machine, and on the other hand, to ensure the safety of the punching and shearing machine during use.
2.Inject lubricating oil regularly
Suppose the lubricating oil is found to be insufficient. In that case, lubricating oil should be injected into each part of the punching and shearing machine in time. The wear of each part of the hedge shear can be reduced to a certain extent to prolong the service life of the punching and shearing machine.
3.Do an excellent job of cleaning the Combined Shearing and Shearing Machine
For the maintenance of the combined cutting and shearing machine, the hedge shear also needs to be cleaned regularly, which requires the operator to clean all parts of the hedge shear after each use. In addition, the worktable of the hedge shearing machine and other working environments need to be cleaned as necessary to maintain the operating environment of the punching shearing machine. The cleaning of each part can reduce not only the wear of each part of the punching machine but also extend the service life of the punching and shearing machine.
4.Replace unqualified parts promptly
During the punching and shearing machine, the wear of parts is inevitable. If some features cannot be used continuously during use, be sure to replace the factors that cannot continue to be used in time, whether for safety reasons or maintenance of the hedge shear.
In summary, if you want to extend the service life of the Combined punching and shearing machine, the operator should strictly follow the instructions of the equipment, whether it is in use or in maintenance. On the one hand, the front hedge shear should be inspected in all aspects to rule out abnormalities and safety hazards, and on the other hand, the punching and shearing machine needs to be cleaned. Maintenance work such as overhauls. China Hydraulic swing beam shear suppliers remind everyone that only by conscientiously doing the above points can the service life of punching shears be extended to a certain extent.