Sheet metal bending machine maintenance

Sheet metal bending machine is a kind of machine equipment provided by manufacturers, which is widely used in machinery manufacturing, aviation manufacturing, automobile manufacturing, paper industry, wood industry and other industries. Due to the complex working principle of sheet metal bending machines, there will always be some problems during maintenance. Especially due to the short service life of sheet metal bending machines, maintenance personnel must work in strict accordance with the regulations during the maintenance process.

The working principle of sheet metal bending machine

The sheet metal bending machine is a machine tool that drives the fixture forward and backward through the spindle, so that the sheet can slide between the two fixtures, and then cuts the sheet into the desired shape through steel balls or blades.

Maintenance steps of sheet metal bending machine

  1. Check the preparation of the machine
  2. Installation of sheet metal plate
  3. Adjustment of the bending table
  4. The work of sheet metal bending machine
  5. Check the preparation of the machine

First, put a safety net around the machine to prevent personal injury. Then, turn on the power switch, and check through the various switches on the control board to see if there is a fault.

Installation of sheet metal plate

Install the sheet metal plate on the workbench, then align the raised part on the plate with the groove on the machine, and use the screwdriver to turn the screwdriver to hold it. Hit four more bolts on the board.

Adjustment of the bending table

Align the bending table parallel to the work table and measure the gap with a ruler. Hold the screwdriver and turn the screwdriver, then hit the four bolts on the table.

The work of sheet metal bending machine

Aim the product image to the target location and zoom in 100 times, then use the alignment knob to align the target to the center of the product image. If it is a round product, the center of the product should be aligned with the circular alignment knob. Then open the scissors latch through the scissors latch, clamp the product to the scissors latch and magnify 100 times. The scissors latch will leave the scissors latch in a fractured state and no hazard will occur if the scissors latch is not used. Care should be taken when using it.

Precautions for sheet metal bending machines

  1. Before using the sheet metal bending machine, you need to understand the safety rules of the machine.
  2. Do not process metal parts on the machine.
  3. Do not put your hands inside the machine.
  4. If you feel uncomfortable, you should stop using the sheet metal bending machine immediately.

The sheet metal bending machine is a machine that processes the sheet into various shapes by bending the sheet. It can bend various shapes of sheets, such as round, square, triangular and hexagonal. The advantages of sheet metal bending machines are fast speed, high precision, and can produce large quantities of products.

The maintenance of sheet metal bending machine is mainly to repair and maintain the transmission part and control part of the bending machine.

The maintenance of sheet metal bending machine is mainly to repair and maintain the transmission part and control part of the bending machine. The transmission part includes a driving device, a transmission mechanism and a deceleration mechanism; the control part includes an electrical control system and a mechanical control system.

The maintenance work of the following five aspects:

  1. Check the parts cleaning;
  2. Adjust the parts;
  3. Waxing the parts;
  4. Add sealant oil or sealant;
  5. Adjust the working parameters.

Sheet metal bending machine technology improvement

With the increasing popularity of sheet metal processing and production, the demand for sheet metal bending machines is also increasing. However, the quality of products processed by traditional sheet metal bending machines often has certain problems. In order to meet customer requirements for product quality and improve processing efficiency, sheet metal bending machine manufacturers should continue to explore and develop new sheet metal bending machine processing methods.

Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn

More bending machine information

request a quote