CNC Guillotine Shearing Machine With P40 QC11K Series

CNC Guillotine Shearing Machine With P40 QC11K Series Features:

• Adopting integral welding frame structure and treated by vibration aging, the CNC Guillotine Shearing Machine With P40 QC11K Series has good performance, high precision, and good accuracy retention.
• Using the slide rail type guide, the upper tool holder moves linearly between the guide rails to maintain the balanced operation of the upper tool holder.
• Movable blade support and four-blade long blade, convenient to adjust blade clearance uniformity, improve sheer quality and prolong blade service life.
• The CNC Guillotine Shearing Machine With P40 QC11K Series adopts a tandem cylinder synchronization system, and the machine tool is evenly stressed.
• Nitrogen return cylinder is adopted to reduce the return time of the upper tool holder and increase the number of shearing times.
• The hydraulic press cylinder is used to press the sheer material to raise the shearing accuracy.

Precautions for the operation of CNC shearing machine

1. Operators should understand the Hydraulic guillotine shearing machine's working principle and operation method.
2. When adjusting the tool clearance of the hydraulic guillotine shearing machine, no material is allowed to contact the tool.
3. It is forbidden for the operator to leave or entrust the operating Hydraulic Guillotine shearing machine.
4. Pay attention to the safety of your fingers when feeding, and do not stand behind the cut.
5. Stop immediately if an abnormality occurs, check the cause and eliminate it in time.
6. Before shutting down, exit the control system program first and then cut off the power.
7. No other items should be placed on the worktable of the Hydraulic guillotine shearing machine to avoid entering the cutting edge and damaging the blade.
8. If the workpiece is incorrect when cutting, stop cutting. It is strictly forbidden to correct by hand during cutting to prevent injury to the hands.
9. Strictly abide by the safety operation rules of machine tool workers, and wear labor protection equipment according to regulations.
10. The blade edge must be kept sharp. If the blade of the Hydraulic Guillotine shearing machine is found to be damaged and worn or stagnant, it should be sharpened or replaced in time.
11. It is not allowed to cut laminated sheets, trim the edges of burrs, thin sheets, and short materials that are not tight.
12. Adjust the gap between the blades of the Hydraulic Guillotine shearing machine according to the thickness of the sheet. Set the position of the rear stop ruler according to the size requirements of the cut material.
13. Before starting, carefully check whether the motor, switch, wiring, and grounding are normal and firm, and check whether the control parts and buttons of the equipment are in the correct position.
14. Regularly and regularly lubricate the machine tool. Check that the oil storage tank of the Hydraulic Guillotine shearing machine should be sufficient before starting the engine. After beginning the oil pump, check the valve and pipeline for leakage, and the pressure should meet the requirements.
15. When two or more people operate, one person should be under the unified command. The operator cooperates closely with the feeder to ensure that the cooperating personnel sends shear signals in a safe position.

It is forbidden to shear iron plates that exceed the sheer thickness of the Hydraulic Guillotine Shearing Machine or quenched steel plates, high-grade alloy steels, square steels, and sheets exceeding the performance of the plate shearing machine so as not to damage the Hydraulic Guillotine Shearing Machine tool.

CNC Guillotine Shearing Machine With P40 QC11K Series Product Highlights

•  Fully EU streamlined design, monolithic and annealed stress relief process for welding robots and equipment.
• All Hydraulic CNC Guillotine Shearing Machine With P40 QC11K Series machines are designed with SOLID WORKS 3D programming and manufactured with the latest technology enhanced ST44-1 high quality steel.
• CNC Guillotine Shearing Machine With P40 QC11K Series is one of the top rated machines, its user friendly CNC controller and low cost hydraulic maintenance will help you increase productivity and keep costs to a minimum.
• Well-known top and bottom tool brands are durable and provide precise bending. Silent high pressure pump.
•  All our hydraulic press brakes have passed ISO 9001 quality system certification and CE certification.

Features of CNC Guillotine Shearing Machine With P40 QC11K Series

•  The new industrial design that integrates modern aesthetic concepts, high-quality production technology, and a simple and elegant appearance.
•  The latest high frequency response hydraulic control technology, CNC Guillotine Shearing Machine With P40 QC11K Series is faster, more efficient and more precise.
•  Rack heat treatment, whole machine stiffness optimization verification, and research and application of hydraulic compensation mechanism ensure the precision of CNC Guillotine Shearing Machine With P40 QC11K Series .
• Optimal parameter ratio and top core configuration, stable performance and simple operation
• MB8 standard 2-axis back gauge system, for workpieces with complex shapes, 4-axis or 5-axis back gauge systems and corresponding molds can be provided for bending workpieces with complex shapes.
• CNC Guillotine Shearing Machine With P40 QC11K Series adopts closed-loop electro-hydraulic servo control technology, the slider position signal is fed back to the CNC system through bilateral gratings, and the CNC system adjusts the oil tank volume by changing the opening of the synchronization valve, thereby controlling the slider (Y1, Y2 ) run at the same frequency to keep the worktable parallel.
•  For different plates, the numerical control system of CNC Guillotine Shearing Machine With P40 QC11K Series can automatically control the table deflection compensation, so that all workpieces have the same angle and length.
• The use of hydraulic deflection compensation results in a uniform full-length workpiece. Hydraulic deflection compensation consists of a group of oil cylinders, which can make the table move relatively and form an ideal convex curve to ensure that the relative positional relationship with the slider remains unchanged. The compensation value depends on the plate thickness and the properties of the material being cut.

CNC Guillotine Shearing Machine With P40 QC11K Series Safety Standard

•  EN 12622:2009 + A1:2013 2.EN ISO 12100:2010 3.EN 60204-1:2006+A1:2009
• Front protection device for finger protection (safety light curtain)
• Korea KACON pedal switch (4 safety level)
• Back metal guard and CE standard
• Safety relay monitoring with foot switch, safety protection
• Safety Standard (2006/42/EC)

CNC Guillotine Shearing Machine With P40 QC11K Series main configuration

• Dutch DELEM DA66T CNC controller
• The grating ruler controls the depth of Y1 and Y2 axis (y1/y2 axis 0.01mm)
• Servo motor drives and controls the X axis (X axis 0.05mm), manually adjust the R axis to move up and down, stop the fingers and easily move along the cylindrical guide rail
• Maintain the accuracy of the silver ball screw and linear guide to 0.01mm √The position of the front bracket can be adjusted along the linear guide along the direction of the table
• Using German Rexroth closed-loop electro-hydraulic servo synchronous control system
• German EMB oil pipe joint √Germany Siemens main motor
• France Schneider Electric System
•  Hydraulic and electrical overload protection
• The top is the mechanical quick clamping die. The lower part is a double V-shaped replaceable mold

FAQ

1. Are you CNC Guillotine Shearing Machine With P40 QC11K Series manufacturer or trading company?

We are the CNC Guillotine Shearing Machine With P40 QC11K Series manufacturer.

2. Don't know how to operate your CNC Guillotine Shearing Machine With P40 QC11K Series machine?

We can send our QC11K CNC Guillotine Shearing Machine With P40 engineer to your country, you can also send your engineer to our factory to learn the operation. In addition, it also comes with detailed installation and operation instructions for the QC11K CNC Guillotine Shearing Machine With P40, which is very simple. We provide phone and email support 24 hours a day.

3. How is the quality of your CNC Guillotine Shearing Machine With P40 QC11K Series  machine?

Hydraulic company is a mature brand in China, through our 12 years of technical research, our CNC Guillotine Shearing Machine With P40 QC11K Series design including structure and detail safety and precision are greatly improved, can match all CE standards or stricter standards . Our machines are present in about 50 countries around the world.

4. What are your CNC Guillotine Shearing Machine With P40 QC11K Series machine payment terms?

We support T/T, L/C, D/P, D/A, Western Union and so on. TT, 30% in advance, 70% balance before the shipment.