6×4000 CNC Guillotine Shearing Machine With P40T QC11K Series

Introduction and working principle of CNC Guillotine Shearing Machine

QC11K 6×4000 CNC Guillotine Shearing Machine With P40T is very common processing equipment, which is a kind of machine capable of bending thin plates. Its CNC Guillotine Shearing Machine structure includes a bracket, worktable, and clamping plate. The worktable is arranged on a shelf, and the worktable is composed of a base and a pressure plate; the ground is connected with the clamping plate through a hinge, and the floor is composed of a seat shell, a coil, and a cover plate. When in use, the ring is energized by the wire, and gravity is generated on the pressure plate after energization so that the thin plate can be clamped between the pressure plate and the base. The CNC Guillotine Shearing Machine adopts electromagnetic clamping so that the pressure plate can be made into a variety of workpiece requirements, the workpiece with sidewalls can be processed, and the operation is very easy.

CNC Guillotine Shearing Machine Operating Specifications

• The CNC Guillotine Shearing Machine should have a special person responsible for operation and storage. The operator must be familiar with the structure and performance of the machine tool.
• When entering the venue, wear overalls, tighten cuffs, wear a work hat to listen carefully, observe, play, and the joke is strictly forbidden, and keep the venue clean and tidy.
• It is strictly forbidden to use CNC Guillotine Shearing Machine with overload. Do not shear hard steel, high-speed steel, alloy steel, castings, and non-metallic materials.
• When multiple people operate the CNC Guillotine Shearing Machine, there should be a dedicated command, and coordination should be coordinated.
• The blade edge should be kept sharp, dull, or damaged and should be repaired or replaced in time.
• It is forbidden to cut two materials of different specifications simultaneously, and overlapping cutting is not allowed.
• When the CNC Guillotine Shearing Machine is fed, the handle is prohibited from promoting the operation under the pressure plate. When cutting the material, it should be pressed with an iron plate. When cutting, the finger leaves the knife-edge at least 200 mm.
• After using the pry, the pry should be pulled out immediately before it can be cut. If the iron plate moves, the wooden pillow should be firmly plugged to avoid hurting people after pressing the foot down.
• The cut workpiece must be placed smoothly, not too high, and not stacked in the aisle. Corner residue and waste should be cleaned up in time to keep the site of the CNC Guillotine Shearing Machine clean and tidy.
• The safe operation of the CNC Guillotine Shearing Machine shall comply with these regulations.

Product Highlights of QC11K 6×4000 CNC Guillotine Shearing Machine With P40T

QC11K 6×4000 CNC Guillotine Shearing Machine With P40T adopts steel welding structure, simple structure, convenient operation, beautiful appearance, low energy consumption, can be equipped with gear reducer, electromagnet, remote control of foot switch, suitable for metallurgy, light Processing and shearing of ordinary steel plates of 0.1~2.0mm in industrial, machinery, hardware：

• Multi-Language
• Manual inching function
• Single set operation
• Program memory
• Made in Germany
• Cutting angle and knife gap control

QC11K 6×4000 CNC Guillotine Shearing Machine With P40T Product details page description

• QC11K 6×4000 CNC Guillotine Shearing Machine With P40T is used for on-line shearing of metal plates. The tensile strength of metal materials should be less than 450 N/mm2, and non-metallic materials include rubber and plastic. The temperature of the hot plate during cutting should be lower than 50 °C, QC11K 6×4000 CNC Guillotine Shearing Machine With P40T can only perform intermittent shearing at full load, and the shear thickness should be reduced when the tensile strength is high.
•  The electric shearing machine is suitable for uncoiling, leveling, shearing, workshops of sheet metal processing production lines
•  The base of the electric shearing machine adopts steel welding structure, which is compact in structure and good in rigidity.
• The trajectory of the blade is precision cast copper, and the friction force of QC11K 6×4000 CNC Guillotine Shearing Machine With P40T is small

• The upper guide plate can be adjusted to a good cutting section, and the lower blade of the QC11K 6×4000 CNC Guillotine Shearing Machine With P40T can be adjusted by welding screws to make the cutting edge smooth
•  The feeding device is pressurized by spring, and the clamp has a spacer block, which has a large pressure. QC11K 6×4000 CNC Guillotine Shearing Machine With P40T is not easy to damage the sheet metal surface.
• QC11K 6×4000 CNC Guillotine Shearing Machine With P40T adopts a completely independent enclosed gearbox transmission system, which is directly connected to the dynamic, compact structure, good gear lubrication, low noise and long life.
• The electric shearing machine is equipped with a pneumatic clutch device.

QC11K 6×4000 CNC Shearing Machine P40T Technical Parameters

FAQ

1.Are you QC11K 6×4000 CNC Guillotine Shearing Machine With P40T manufacturer or trading company?

We are QC11K 6×4000 CNC Guillotine Shearing Machine With P40T manufacturer.

2.What shall we do if don't know how to operate yourQC11K 6×4000 CNC Guillotine Shearing Machine With P40T?

We can dispatch our QC11K 6×4000 CNC Guillotine Shearing Machine With P40T engineers to your country and you can also send your engineers to our factory for learning operation. Besides, there are detailed installation and operating instructions attached, it is very simple. We have telephone and email support at 24 hours per day.

3.How about your QC11K 6×4000 CNC Guillotine Shearing Machine With P40T machine quality?

Hydraulic company is a mature brand in CHINA,through our 12 years research in technology,our design including structure and detailed security and precision has enhanced greatly,and can match all the CE standard or more strict standard.Our QC11K 6×4000 CNC Guillotine Shearing Machine With P40T machines distribute worldwide to about 50 countries where there are metal plate industry And where there are our machines,there are good reputation and terminal user satisfaction.

4.What are your QC11K 6×4000 CNC Guillotine Shearing Machine With P40T payment terms?

We support T/T, L/C, D/P, D/A, Western Union and so on. TT, 30% in advance, 70% balance before the shipment.