Knowledge about shearing machine, quick collection

Shearing machine use

  • Shearing machine for cold bending forming line: such as special shearing machine configured on production lines such as automobile longitudinal beam cold bending line, carriage side baffle production line, color steel plate forming line, etc.;
  • Shearing machine for steel structure production line: it is mostly used for angle steel and H-beam automatic production line to complete the shearing process;
  • Plate opening and leveling line shearing machine: It is a high-speed shearing machine designed to meet the requirements of high-speed cutting of the production line for plate uncoiling and leveling. The thick plate line is mostly hydraulic high-speed shearing machine, and the thin plate line is more Equipped with pneumatic shearing machine; high-speed line is equipped with flying shearing machine, continuous production and high efficiency.

 

Shearing machine oblique blade shearing machine

The upper and lower blades of the shearing machine are at an angle. Generally, the upper blade is inclined, and the inclination angle is generally 1° to 6°. The shearing force of the inclined blade shearing machine is smaller than that of the flat blade shearing machine, so the motor power and the weight of the whole machine are greatly reduced, and the practical application is the most.

 

Shearing Machine Flat Blade Shearing Machine

The shearing quality is good, the distortion is small, but the shearing force is large and the energy consumption is large. More mechanical transmission. The upper and lower cutting edges of the shearing machine are parallel to each other, and are often used in hot-cutting billets and slabs in rolling mills.

 

Multipurpose shears

  1. Combined punching and shearing machine: it can complete the shearing of the sheet and the profile, which is mostly used for the blanking process;
  2. Sheet metal bending and shearing machine: that is, two processes of cutting and bending can be completed on the same machine.The specific introduction of the type of shearing machine.

 

The following is the specific situation:

  1. Special shearing machine: use it with other equipment to complete special purposes
  2. Shearing machine for cold bending forming line: for example, special shearing machine configured on production lines such as automobile longitudinal beam cold bending line, carriage side baffle production line, and color steel plate forming line.
  3. Shearing machine for steel structure production line: mostly used for angle steel and h-beam automatic production line to complete the shearing process
  4. Plate opening and leveling shearing machine: It is a high-speed shearing machine designed to meet the requirements of fast cutting of the production line on the plate uncoiling and leveling line. The thick plate line is mostly hydraulic high-speed shearing machine, and the thin plate line is mostly hydraulic Equipped with pneumatic shearing machine; high-speed line is equipped with flying shearing machine, continuous production and high efficiency.
  5. Multipurpose shears, combined punching and shearing machine: it can complete the shearing of the sheet and the profile, which is mostly used in the blanking process
  6. Sheet metal bending and shearing machine: that is, two processes of cutting and bending can be completed on the same machine.
  7. Oblique blade shearing machine: The upper and lower blades of the shearing machine are at an angle. Generally, the upper blade is inclined, and the inclination angle is generally 1° to 6°. The shearing force of the inclined blade shearing machine is smaller than that of the flat blade shearing machine, so the motor power and the weight of the whole machine are greatly reduced, and the practical application is the most.
  8. Flat blade shearing machine: good shearing quality, small distortion, but large shearing force and large energy consumption. More mechanical transmission. The upper and lower cutting edges of the shearing machine are parallel to each other, and are often used in hot-cutting billets and slabs in rolling mills.
  9. Shears are mainly used to cut straight edges of sheet metal of various sizes. It is widely used in various industrial sectors such as aircraft, steel rolling, automobiles, bridges, instruments, boilers, electrical appliances, ships, tractors, and pressure vessels.

qc11k 6×4000 cnc guillotine shearing machine with p40t 2 1

Correct purchase of shearing machine

When purchasing, you should pay attention to the following points:

  1. Determine the specifications and parameters of the purchased machine according to your own demand parameters. At the same time, you must also take into account the demand after expanding the scale of the enterprise to leave a certain margin to determine the parameters of the machine. Especially for the shearing machine, for the required range of the material thickness of the sheared material, the size of the slitting machine, etc., after the model parameters of the machine are determined, you can contact the manufacturer to buy it.
  2. Confirm which manufacturers produce the machine to be purchased. In this link, it is often the easiest to ignore, because no matter which manufacturer is contacted, basically the manufacturer will inform the professional manufacturer of this type of product. In fact, different manufacturers produce models. Often different, manufacturers often provide various types of products by adjusting the goods. Therefore, users should pay special attention to choosing the one that suits them best.
  3. After contacting a number of companies that produce machines and obtaining the price, parameters, payment and delivery methods of the machines, the most important step is to choose the manufacturer to buy. Generally, a trusted manufacturer is selected after removing the highest and lowest prices, so as to obtain better cost performance and at the same time ensure quality and after-sales service.
  4. Select several special manufacturers for comparison, and learn more about the usage of the machine tools purchased around, the quality of the machines, and especially the after-sales service. Considering various aspects, choose the manufacturer with the best price and the best service.
  5. After confirming the manufacturer, the next step is to sign the contract to pay the deposit, take delivery with payment or cash on delivery and other related matters.

 

 

Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn

More bending machine information

request a quote