6×4000数控剪板机P40T QC11K系列

Introduction and working principle of CNC Guillotine Shearing Machine

QC11K 6×4000 CNC Guillotine Shearing Machine With P40T is very common processing equipment, which is a kind of machine capable of bending thin plates. Its CNC Guillotine Shearing Machine structure includes a bracket, worktable, and clamping plate. The worktable is arranged on a shelf, and the worktable is composed of a base and a pressure plate; the ground is connected with the clamping plate through a hinge, and the floor is composed of a seat shell, a coil, and a cover plate. When in use, the ring is energized by the wire, and gravity is generated on the pressure plate after energization so that the thin plate can be clamped between the pressure plate and the base. The CNC Guillotine Shearing Machine adopts electromagnetic clamping so that the pressure plate can be made into a variety of workpiece requirements, the workpiece with sidewalls can be processed, and the operation is very easy.

CNC Guillotine Shearing Machine Operating Specifications

• The CNC Guillotine Shearing Machine should have a special person responsible for operation and storage. The operator must be familiar with the structure and performance of the machine tool.
• When entering the venue, wear overalls, tighten cuffs, wear a work hat to listen carefully, observe, play, and the joke is strictly forbidden, and keep the venue clean and tidy.
• It is strictly forbidden to use CNC Guillotine Shearing Machine with overload. Do not shear hard steel, high-speed steel, alloy steel, castings, and non-metallic materials.
• When multiple people operate the CNC Guillotine Shearing Machine, there should be a dedicated command, and coordination should be coordinated.
• The blade edge should be kept sharp, dull, or damaged and should be repaired or replaced in time.
• It is forbidden to cut two materials of different specifications simultaneously, and overlapping cutting is not allowed.
• When the CNC Guillotine Shearing Machine is fed, the handle is prohibited from promoting the operation under the pressure plate. When cutting the material, it should be pressed with an iron plate. When cutting, the finger leaves the knife-edge at least 200 mm.
• After using the pry, the pry should be pulled out immediately before it can be cut. If the iron plate moves, the wooden pillow should be firmly plugged to avoid hurting people after pressing the foot down.
• The cut workpiece must be placed smoothly, not too high, and not stacked in the aisle. Corner residue and waste should be cleaned up in time to keep the site of the CNC Guillotine Shearing Machine clean and tidy.
• The safe operation of the CNC Guillotine Shearing Machine shall comply with these regulations.

QC11K 6×4000数控剪板机P40T产品亮点

QC11K 6×4000数控剪板机P40T采用钢焊接结构，结构简单，操作方便，外型美观，能耗低，可配齿轮减速机、电磁铁、遥控脚踏开关，适用于冶金、轻加工及工业、机械、五金中0.1~2.0mm普通钢板的剪切：

• 多语言
• 手动点动功能
• 单组操作
• 程序存储器
• 德国制造
• 切割角度和刀距控制

QC11K 6×4000 数控剪板机 P40T 产品详情页面说明

• QC11K 6×4000数控剪板机P40T用于金属板的在线剪切。金属材料的抗拉强度应小于450 N/mm2，非金属材料包括橡胶和塑料。切割时热板温度应低于50℃，QC11K 6×4000数控剪板机P40T只能在满负荷下进行间歇剪切，抗拉强度高时应减小剪切厚度。
•  电动剪板机适用于钣金加工生产线的开卷、校平、剪板、车间
•  电动剪板机底座采用钢焊接结构，结构紧凑，刚性好。
• 刀片轨迹为精密铸铜，QC11K 6×4000数控剪板机配P40T摩擦力小

• 上导板可调节至良好的切割断面，QC11K 6×4000数控剪板机P40T下刀片可通过焊接螺钉调节，使切割边缘光滑
•  送料装置采用弹簧加压，夹具带有隔块，压力大。 QC11K 6×4000数控剪板机P40T不易损坏钣金表面。
• QC11K 6×4000数控剪板机P40T采用完全独立封闭式齿轮箱传动系统，动力直联，结构紧凑，齿轮润滑好，噪音低，寿命长。
• 电动剪板机配有气动离合装置。

QC11K 6×4000数控剪板机P40T技术参数

常问问题

1.您是 QC11K 6×4000 数控剪板机 P40T 制造商还是贸易公司？

我们是 QC11K 6×4000 数控剪板机 P40T 制造商。

2.如果您的QC11K 6×4000数控剪板机P40T不知道怎么办？

我们可以派遣我们的QC11K 6×4000数控剪板机P40T工程师到您的国家，您也可以派您的工程师到我们工厂学习操作。此外，还附有详细的安装和操作说明，非常简单。我们每天 24 小时提供电话和电子邮件支持。

3.您的QC11K 6×4000数控剪板机P40T机器质量怎么样？

液压公司在中国是一个成熟的品牌，通过我们12年的技术研究，我们的设计包括结构和细节的安全性和精度大大提高，可以匹配所有的CE标准或更严格的标准。我们的QC11K 6×4000数控剪板机机器 P40T机器遍布全球约50个有金属板行业的国家和有我们机器的地方，有良好的声誉和终端用户的满意度。

4.你们的 QC11K 6×4000 数控剪板机 P40T 付款条件是什么？

我们支持 T/T、L/C、D/P、D/A、Western Union 等。 TT，30% 预付，70% 余额发货前。