3 минуты, чтобы изучить стригальную машину с поворотной балкой

Steel can become a helpful talent because it has undergone various trials and fiery tests in the smelting process. To become a valuable "talent", people also need to meet challenges in innovation and experience the difficulty of life. A swing beam shearing machine is widely used with simple operation and quick start, which can shear stainless steel, ordinary carbon steel, copper iron and other plates.

Buy Swing beam shearing machine PrecautionsМашина для резки крыльевых балок

Machine tools such as Swing beam shearing machine, NC press brakes, and Electric shearing machine become fixed assets after purchase. Therefore, special attention should be paid to the quality of products when purchasing. Good equipment has a long service life, but the work efficiency is high, and as an investment in fixed assets, the loss is slight.

First, consider the sheet metal plate and the maximum processing thickness and length of the metal plate that needs to be shared by the Swing beam shearing machine. Use these to determine the model of the purchased device. Of course, you can also contact the Maanshan Xiyuan manufacturer to recommend it when you are not sure.

Particular attention should be paid to expanding the scale of the enterprise in the Buy Swing beam shearing machine, and it is best to leave a certain margin before determining the model of the device. After the machine model is selected, learn more about the usage of the surrounding Buy Swing beam shearing machine, the quality of the machine, and especially the after-sales service.

Confirm which manufacturers are producing the Buy Swing beam shearing machine. In this link, friends are often overlooked because no matter which manufacturer is contacted, the manufacturer will inform the professional production of this product.

In fact, the models produced by different manufacturers are often other, and manufacturers often provide various types of products by adjusting the goods. The after-sales service of such purchased products is less reliable. Maanshan Xiyuan Machinery Technology Co., Ltd. is recommended.

Our company integrates production and sales and independently develops and produces various QC11K CNC Guillotine Shearing Machine With E21S, QC12k Swing Beam Cutting Machine With E21s Sheet, QC12K 16x3200 Hydraulic Swing Beam Cutting Machine With E21S, etc. Equipment, installation, use and maintenance in after-sales service will guide you one by one, and the quality is guaranteed.

After you can contact China Swing beam shearing machine suppliers to obtain the machine's price, parameters, payment, and delivery method, the most crucial step is choosing the manufacturer to buy. Generally, a trusted manufacturer is selected after removing the highest and lowest prices to obtain better cost performance and, at the same time, ensure quality and after-sales service.

Before starting the Swing beam shearing machine

  • The machine operator must be familiar with the Swing beam shearing machine's main structure, performance, and usage.
  • Check whether the switch is in good condition, whether the control cabinet and console buttons are in good condition, and whether each component is loose.
  • Check whether the tool is installed correctly and whether there is looseness, tilt or debris.
  • Check whether each action mechanism is loose, damaged or abnormal.
  • Check that there are no objects around and inside the Swing beam shearing machine that prevents the engine from running.
  • Oil the lubrication points of the Swing beam shearing machine.
  • The swing beam shearing machine starts upкитайская машина для резки крыльев
  • Start the oil pump and turn on the power.
  • Press the motor start button.
  • Wait for a few minutes until the motor of the swing beam shearing machine fully enters the running state.
  • Turn the manual switch to the single position and manually test the shearing of the Swing beam shearing machine to confirm that it is normal.
  • Adjust the blade clearance according to the thickness of the cut material.
  • Adjust the master or fixture according to the shared material's width.
  • Make 1 or 3 empty strokes first, and then the shearing work can be carried out after it is normal.
  • Put the products to be cut according to the process requirements.
  • Press the footswitch to cut the product.

Precautions

  • The machine tool is suitable for sharing all kinds of steel plates, copper plates, aluminium plates and non-metallic material plates whose material thickness is the rated value of the machine tool.
  • It must be materials without hard marks, welding slag, slag inclusion and welding seam, and excessive thickness is not allowed.
  • When picking up and placing products, it should be carried out after the rise is stable. Be careful that the knife slides down and hurts your hands.
  • It is not allowed to cut laminated sheets, trim the edges of raw sheets, and cut thin and short sheets that are not tightly pressed.
  • The cutting edge of the blade should be kept sharp. If the cutting edge becomes dull or cracked, it should be replaced in time.
  • When cutting, the pressing device should firmly press the sheet, and it is not allowed to cut in a state where it is not packed tightly.
  • The equipment must be entirely powered off before servicing.
  • Clean up the oil around the Swing beam shearing machine in time to prevent slipping.
  • It is forbidden to tighten the stopper or adjust the blade gap by tapping. The vehicle should be stopped when changing the guide rail clearance and the blade clearance before proceeding. It is forbidden to enter the cutting area by hand or pick up and pick up materials by hand during the working process.

After the Swing beam shearing machine is finished

  • Press the motor stop button.
  • Shut off the oil pump.
  • Check that each operation switch is non-working.
  • Clean up the inside and outside of the swing beam shearing machine, debris, and debris, and ensure cleanliness.
  • Arrange and clean the working environment and confirm the cleanliness.

Maintenance Precautions

  • Clean the inside and outside of the swing beam shearing machine before starting the engine every day to ensure that there are no sundries and oil stains.
  • Check the Swing beam shearing machine for oil leakage every day.
  • Lubricate the equipment before starting the machine every day.
  • Always check whether the bolts and parts of each part of the equipment are loose, damaged or displaced, and fasten and repair them in time.

Believe that vid can create better equipment

To grasp innovation is to learn development, and to hold innovation is to get the "bullnose" of development. "I'm not afraid of not doing it well, but I'm so scared not to do it. The innovative technical transformation has been done well. The above is the relevant knowledge of the Стригальная машина с поворотной балкой introduced. If you have any questions you don't understand, please get in touch with us, and we will promptly give you a reply.

Поделиться на facebook
Фейсбук
Поделиться на twitter
Твиттер
Поделиться на linkedin
LinkedIn

Больше информации о гибочном станке

запрос цитаты

Что такое 7+4?