40ton/1500 mm Press Brake Sheet Metal Bending Machine With DA-53T WE67K Series

Features of Press Brake Sheet Metal Bending Machine

• Fast speed, high efficiency, low energy consumption.
• Batch processing of workpieces, high product consistency.
• Daily maintenance is simple, and the maintenance cost is lower.
• High degree of automation and simple operation, Press Brake Sheet Metal Bending Machine requires low manpower and professional skills.
• Complex shapes can be formed at one time, such as vertical bending, non-right angle bending, arc, polygon bending, etc.
• Support various loading and unloading methods such as manual loading and unloading, truss robot, robotic arm, etc.
• High expandability, can be equipped with a mechanical arm for loading and unloading according to production needs, and the Press Brake Sheet Metal Bending Machine can also be connected with a fully automatic assembly line.
• Full closed-loop control system, the double servo motor coordination error is guaranteed to be within ±0.02mm;

Basic principles of bending processing order

• Bending from the inside to the outside;
• Bending from small to large;
• Bend special shapes first, and then bend general shapes;
• After the previous process is formed, it does not affect or interfere with the subsequent process.

Fault finding techniques

• When the hydraulic system of the Press Brake Sheet Metal Bending Machine fails, the situation should be severely punished and monitored in a timely manner.
• According to the circumstances and causes of the failure, appropriate technical means are adopted to carry out maintenance;
• When the Press Brake Sheet Metal Bending Machine system is not working properly, the LED should be checked in time and all aspects of itself should be inspected. This is the basic inspection method.
• In terms of operation, you should turn on the switch of the programming device and check the status of the switch at the input and output ports.
• According to the location where the operation stopped, find the entry point for the fault,
• Secondly, the content displayed by the LED and the programmer should be compared.
• Find different places according to the comparison situation, and check the connection status of the input and output ports on the input content module.
• If the display content of the two is the same, determine the position of the switch.
• If the display status of the two is different, update the status of the input and output ports, and change the wiring method and method.
• After the end, the data signal should be overhauled to ensure the correct operation of the machine.
• The maintenance of the Press Brake Sheet Metal Bending Machine requires mastering the basic operation of the machine tool, and the software and hardware of the machine tool must be understood.
• Through the handling of this fault, I have a deep memory from finding the fault point to troubleshooting, and I have gained a lot of gains and improvements.
• The reason for the alarm number on the Press Brake Sheet Metal Bending Machine machine tool is due to the lack of detailed explanation, and it is necessary to have a deeper understanding of the fault phenomenon.
• Detailed comparison and analysis of various aspects of the cause of the alarm, and optimize the order and method of inspection.
• Conduct a comprehensive analysis of the problems found to thoroughly find out the failure of the Press Brake Sheet Metal Bending Machine.

Basic Features of WE67K 40T 1500 Press Brake Sheet Metal Bending Machine With DA-53T

• WE67K 40T 1500 Press Brake Sheet Metal Bending Machine With DA-53T are equipped with standard single axis
• Back gauge system (x axis) and uniaxial bending angleSystem (Y-axis), optional to add V-axis compensation function, and choose the right mold to bend easily
  Workpieces with complex shapes.
• EU-wide streamlined design
• Heat Treated Frame
• Hydraulic Synchronous Control

Components of WE67K 40T 1500 Press Brake Sheet Metal Bending Machine With DA-53T

مراقب

Using Estun E21 controller, it can store 40 programs, each program has 25 steps.

Torque Synchronous Control System

Using steel torsion bar synchronization system, the structure is very simple, but the accuracy is very high. at both ends
ram, there are two synchronizing devices so that the ram movement is always parallel to the feasible. this structure
The effect of the balancing movement during operation is highlighted.

المحرك الرئيسي

The motor of our bending machine adopts the world-renowned brand "Siemens", which not only has low noise during work
The machine also has a longer lifespan.

مضخة وقود

Amazing low noise, made of high-strength cast iron and unique internal noise reduction design; low sensitivity to oil contamination and long service life

Hydraulic systemOur WE67K 40T 1500 Press Brake Sheet Metal Bending Machine With DA-53T is connected with BOSCH-REXROTH integrated hydraulic control system that limits the number of tubes, making it more reliable and easier to maintain.

النظام الإلكتروني

Our WE67K 40T 1500 Press Brake Sheet Metal Bending Machine With DA-53T uses Schneider Electric components. This high-quality electrical component can make the machine perform well, even in the case of unstable power, customers can easily get a replacement anywhere in the world.

Back Gauge

We use Taiwan Shangyin ball screws and rods to ensure high precision movement in the X axis. And the back gauge adopts step-control synchronous pulley mechanism engine. The up and down movement of the back gauge finger can be adjusted manually.WE67K 40T1500 Press Brake Sheet Metal Bending Machine With DA-53T is equipped with standard top punch and multi-V bottom die for various applications.

X-axis Motor

The X-axis movement of the WE67K 40T 1500 Press Brake Sheet Metal Bending Machine With DA-53T is controlled by a stepper motor.

Quick Clip

Quick clamps are available if the punch needs to be changed

Foot Switch

The foot switch will be used to control RAM. There is an emergency stop button on it.

Manual Crowning

Crowning will compensate for deflection table during the bending process to obtain a higher Working precision.

Front Light Curtain

A front light curtain will be very helpful in protecting the operator's fingers.

لماذا تختار الهيدروليكية WE67K 40T 1500 Press Brake Sheet Metal Bending Machine With DA-53T?

•  أسعار تنافسية ： مراقبة التكلفة العلمية - إنتاج أعلى وسعر أقل.
• الدعم الفني ： دعم فني احترافي وفي الوقت المناسب - مهندسون من الخارج.
• Design Service：Our team has experience in all fields relating to product design and development. If you have any needs for your.WE67K 40T 1500 Press Brake Sheet Metal Bending Machine With DA-53T، نحن هنا لتقديم دعمنا.
• التسليم ： تمكننا أقسام الشراء والإنتاج السريع من تسليم الآلات في الوقت المناسب.